{"product_id":"osoyoo-3-5-inch-mipi-dsi-480-800","title":"OSOYOO 3.5\" DSI Touchscreen for Raspberry Pi – 480×800 IPS","description":"\u003cp\u003e3.5-inch IPS DSI touchscreen for embedded projects. Add touch controls and status information to projects where enclosure space matters. The OSOYOO 3.5-inch display combines a 480×800 IPS panel with a MIPI DSI interface and capacitive touch input. It plugs straight into the Raspberry Pi's MIPI DSI ribbon connector with a single cable — no HDMI and no GPIO header required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: this 3.5\" screen requires a driver.\u003c\/strong\u003e It is not a driverless plug-and-play display. After installing the driver you get a complete desktop touch experience, including a brightness slider, display rotation, and touch that rotates together with the display. Select the driver guide for your OS from the links below.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose this screen\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 3.5\" size:\u003c\/strong\u003e ideal for compact control panels, robotics interfaces, portable prototypes, embedded HMI panels, Pi-based dashboards and smart-home controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses the DSI\/MIPI port only:\u003c\/strong\u003e no HDMI cable and no USB data cable. Video and touch both run through the single DSI ribbon cable, keeping HDMI available for other display needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e480×800 IPS panel:\u003c\/strong\u003e wide viewing angle, 300 cd\/m² brightness, glass panel surface, 16.7M colours (24-bit RGB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitive touch:\u003c\/strong\u003e smooth and responsive. Under the official Raspberry Pi OS it works as a single-touch screen; multi-touch depends on the OS and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered through the DSI connector:\u003c\/strong\u003e no separate power adapter needed for a standard setup. A backup 5V\/GND header and power cable are included for cases where DSI power is insufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot just Raspberry Pi:\u003c\/strong\u003e also works with ESP32-P4 development boards (see the compatibility note below).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal engineering support:\u003c\/strong\u003e contact OSOYOO for board selection, setup questions and volume pricing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay size: 3.5 inches\u003c\/li\u003e\n\u003cli\u003ePanel: IPS LCD, wide viewing angle\u003c\/li\u003e\n\u003cli\u003eNative resolution: 480×800 pixels\u003c\/li\u003e\n\u003cli\u003eActive area: ~45.36 × 75.60 mm\u003c\/li\u003e\n\u003cli\u003eBrightness: ~300 cd\/m² (typical)\u003c\/li\u003e\n\u003cli\u003eColours: 16.7M (24-bit RGB)\u003c\/li\u003e\n\u003cli\u003eSurface: glass panel\u003c\/li\u003e\n\u003cli\u003eDisplay interface: MIPI DSI\u003c\/li\u003e\n\u003cli\u003eTouch: capacitive (single-touch under the official Raspberry Pi OS; multi-touch depends on OS and application)\u003c\/li\u003e\n\u003cli\u003eBacklight control: Raspberry Pi software brightness (slider \/ command line)\u003c\/li\u003e\n\u003cli\u003ePower input: primary: Raspberry Pi DSI connector; backup: onboard 5V \/ GND header\u003c\/li\u003e\n\u003cli\u003eOperating temperature: −20 to 70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi boards with a DSI connector: Raspberry Pi 5, 4B, 3B+, 3B, 2B\u003c\/li\u003e\n\u003cli\u003eCompute Modules: CM4 \/ CM5 on carrier boards (depends on the carrier and requires manual config.txt setup)\u003c\/li\u003e\n\u003cli\u003eESP32-P4: some ESP32-P4 IO boards — please confirm the IO board has the same DSI port as the Raspberry Pi board\u003c\/li\u003e\n\u003cli\u003eOperating systems: Raspberry Pi OS (Bookworm \/ Trixie, 64-bit Desktop); Ubuntu\u003c\/li\u003e\n\u003cli\u003eCables: Pi 4B \/ 3B+ \/ 3B \/ 2B have a single 15-pin DISPLAY port; Pi 5 has two 22-pin DISP0 \/ DISP1 ports and needs a 22-pin to 15-pin cable (DISP1 by default; add `,dsi0` when using DISP0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × OSOYOO 3.5-inch DSI touchscreen (panel and PCB assembled)\u003c\/li\u003e\n\u003cli\u003e1 × DSI FPC ribbon cable, 15-pin (for Pi 5 \/ CM5 use a 22-pin to 15-pin cable)\u003c\/li\u003e\n\u003cli\u003e1 × 5V power cable (to supplement power when DSI power is insufficient)\u003c\/li\u003e\n\u003cli\u003e1 × standoff \/ screw mounting kit\u003c\/li\u003e\n\u003cli\u003e1 × quick-start card\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSet up\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConnect the DSI ribbon cable to your Raspberry Pi's DISPLAY \/ DSI port.\u003c\/li\u003e\n\u003cli\u003eIn normal use the display is powered through the DSI cable — no extra wiring or power adapter is needed. Use an adequate genuine power supply for the Raspberry Pi so display and touch operate reliably.\u003c\/li\u003e\n\u003cli\u003eInstall the driver for your OS by following the guide linked below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways power off before connecting or disconnecting the ribbon cable or jumpers.\u003c\/li\u003e\n\u003cli\u003eIf DSI power is insufficient (for example an under-rated adapter, a long power cable, or heavy USB peripheral load on the Pi), use the included cable to supplement power: connect the header's 5V to the Raspberry Pi 5V pin and GND to the Raspberry Pi GND pin. Insufficient power may cause flicker, unresponsive touch, or a blank screen. The external supply must be 5V — do not reverse the polarity or exceed the voltage, or the board may be damaged.\u003c\/li\u003e\n\u003cli\u003eThe panel surface and ribbon are fragile — avoid bending, pressing, or dropping. Use in a dry, clean environment; avoid liquid ingress and electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003eDo not disassemble the module unless you are a professional.\u003c\/li\u003e\n\u003cli\u003eIf your project needs reliable multi-touch, please verify on your target OS and application first — under the official Raspberry Pi OS this display works as a single-touch screen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eVolume orders and engineering enquiries\u003c\/h3\u003e\n\u003cp\u003eTell us your target board, operating system, screen size, sample quantity and estimated production volume. Contact OSOYOO for compatibility assistance and volume pricing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompliance support:\u003c\/strong\u003e CE\/FCC\/UL-related documentation and certification work are in progress. Contact OSOYOO to confirm the current status for your exact model and discuss support for your product's certification requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTutorial:\u003c\/strong\u003e \u003ca href=\"https:\/\/osoyoo.com\/2026\/08\/06\/osoyoo-3-5-inch-480x800-dsi-capacitive-touchscreen-v4-0\/\"\u003eOSOYOO 3.5-inch 480×800 Mipi DSI Capacitive Touchscreen v4.0 (Model No. 2026005500)\u003c\/a\u003e\u003cbr\u003e\n\u003cstrong\u003eDriver guides:\u003c\/strong\u003e \u003ca href=\"https:\/\/osoyoo.com\/?p=62669\"\u003eRaspberry Pi OS (Bookworm \/ Trixie)\u003c\/a\u003e · \u003ca href=\"https:\/\/osoyoo.com\/?p=64039\"\u003eUbuntu\u003c\/a\u003e · \u003ca href=\"https:\/\/osoyoo.com\/?p=62664\"\u003eESP32-P4\u003c\/a\u003e\u003cbr\u003e\n\u003cstrong\u003eDatasheet:\u003c\/strong\u003e \u003ca href=\"http:\/\/osoyoo.com\/picture\/2026005500\/2026005500_datasheet.pdf\"\u003e2026005500 datasheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n","brand":"OSOYOO","offers":[{"title":"Default Title","offer_id":54380577161327,"sku":"2026005500-OSO","price":36.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/3399\/5894\/files\/6316384fb5e3477d2ec8e543f0254ea5.jpg?v=1790230232","url":"https:\/\/osoyoo.store\/de-eu\/products\/osoyoo-3-5-inch-mipi-dsi-480-800","provider":"OSOYOO.Store","version":"1.0","type":"link"}