OSOYOO 5 Inch MIPI DSI IPS Touch Screen LCD Display 800x480 for Raspberry Pi 5 4 3 2
OSOYOO 5 Inch MIPI DSI IPS Touch Screen LCD Display 800x480 for Raspberry Pi 5 4 3 2
- This screen is made with IPS material, which can reduce reflexion rate.
- DSI Connector compatible with MIPI standard, Plug and Play, No Driver Needed !
- Capacitive Touch Screen, Finger Touch,800x480 high resolution, better touch response, faster response time
- 5 inch display monitor with high resolution picture and large viewing screen.
- Free drive support Raspberry, Ubuntu, RetroPie, OpenElec, OSMC, Arch system and so on.
- Support Raspberry Pi 5, 4 3B+, 3B, 3A+ and 2B.
Feature
- The 5" LCD is a display which connects to the Raspberry Pi through the DSI connector.
- It is capacitive touch LCD screen.
- It is compatible with Raspberry Pi 5, 4 3B+, 3B, 3A+ and 2B
- Equipped with reserved fixing holes for control boards – suitable for Raspberry Pi 5, 4, 3 model B+,3 model B, and 2 model B.
- It doesn't need to install any driver, and you can plug and play.
- The Physical resolution of LCD is 800*480
- No need of additional power
Creative for DIY
As OSOYOO 5" DSI touch screen connect with Raspberry Pi via DSI ribbon cable, makers can extend the raspberry pi GPIOs for DIY projects.
What's more, no need driver and supported multiple Linux operating systems, makers can create more ideas.
What’s Inside?
1x 5 inches DSI Touch LCD Screen for Raspberry Pi
1x 15 pin to 15 pin DSI FFC 10cm Cable for Raspberry Pi 2/3/4/ (the metal connectors of two side are at the same side)
1x 15pin-1mm to 22pin-0.5mm DSI FPC 20cm cable for Raspberry Pi 5, (the metal connectors of two side is at the opposite side)
1x cross screwdriver
1x User manual
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
Reviews
Customer Reviews
It was easy to install and worked fine. My problem with it was that I couldn't properly size the screen no matter what I tried. I had to reboot several times because I would open a program and, because the screen was misized, I couldn't close it.
This is a great display and I'm using it on my BLV mgn Cube printer build. The only issue is that the cable it comes with is straight-thru as noted elsewhere and all the other RPi cables are twisted. I needed a longer cable so I cut off one end of my meter long cable and stripped off the insulation on the other side using a detail file. The backing from the cut off end is needed to make sure the new cable is thick enough to latch into the connector but other than that the modified cable works great.
Plugged it in and it immediately worked. It's awesome to have a screen that doesn't require 5 other items just to hook it up to the PI. I'm creating a custom case for the Pi and screen and this screen should work great. The brightness is good but the only way to adjust is through command but that is ok. As others mentioned the ribbon cable is the oddity in this purchase. Both connections are on the same side so using a normal cable wont work. Only thing I'd like to see are cables listed for purchase with the device. The cable that comes with it is about 4 inches long so it works but a longer cable would be nice. After seeing many replys to questions by the company I decided to message them about it. I asked how much an 8-10 in cable would cost. I received the reply they don't have any which is a big disappointment. Still works great just not good that a larger cable cannot be found anywhere.
What can I say? This is like ONE of only TWO screens in the ENTIRE UNIVERSE that runs on the pi display port. And it doesn't have a separate driver board that I have to figure out what to do with. Those were its two main selling points. It has a good enough picture, I suppose. It could be brighter. The touchscreen works flawlessly. And doesn't feel cheap like some OTHER displays. I only wish it was an IPS! Oh well.. Maybe someday... At least NOW I can fit everything inside the case, and is powered directly from the display port. I haven't had it long enough to know what kind of battery life to expect; but it's been running for roughly two hours on a 5000mA battery and has only drained a quarter of it so far. Yes I would recommend it.
This is a fairly well built screen, everything that's needed is included, ribbon cable, standoffs and screws. The quality image quality is good.
