OSOYOO 10.1″ MIPI DSI Touch Screen for Raspberry Pi 5/4/3/2 | IPS 800×1280 | Driver Required | Industrial Embedded Monito
Free Shipping Over $70
Money back Guaranteed 100%
Refund Policy 30 Days
OSOYOO 10.1″ MIPI DSI Touch Screen for Raspberry Pi 5/4/3/2 | IPS 800×1280 | Driver Required | Industrial Embedded Monito
-
🌟 1. Product Overview
The OSOYOO 10.1″ MIPI DSI Touch Screen is a high-quality display designed for Raspberry Pi computers (Pi 5 / 4 / 3 / 2). Featuring an 800×1280 IPS panel with capacitive touch, it provides clear visuals, wide viewing angles, and accurate touch response — ideal for embedded, industrial, and DIY projects.
⚠️ Important: This OSOYOO display uses the DSI interface only and requires driver installation before use. It is not HDMI or USB plug‑and‑play.
⚠️ Online Tutorial: https://osoyoo.com/2025/08/05/osoyoo-10-1-inch-dsi-display/🔌 2. Interface & Compatibility
✔ MIPI DSI Interface (2 & 4 lanes supported)
✔ Compatible with: Raspberry Pi 5 / 4 / 3 / 2
✔ Supports latest Raspberry Pi OS (Bookworm / Trixie kernel 6.12+)
✔ Designed for embedded Linux & Raspberry Pi OS desktop
💡 2‑Lane Mode (default) — Quick setup for general use
💡 4‑Lane Mode (recommended) — Uses lower signal clock, reduces EMI noise, and increases display stability in industrial applications
📊 3. Technical Specifications
Parameter
Value
Brand
OSOYOO
Screen Size
10.1″
Resolution
800×1280 IPS
Touch Type
Capacitive (G+G)
Interface
MIPI DSI (2 & 4 lanes)
Refresh Rate
Up to 60 Hz
Surface Hardness
6H toughened glass
Brightness
250 nits
Power
5 V via GPIO (Pi)
Viewing Angle
85°/85°/85°/85°
Operating Temp
0‑50 °C
Storage Temp
-10‑70 °C
🛠 4. Installation & Driver Instructions
OSOYOO 10.1″ DSI display requires driver installation:
- Connect DSI ribbon cable to the Pi’s DSI port
- Connect 5 V/GND to GPIO pins
- Secure Pi with included screws
- Install the provided driver (supports 2‑lane and 4‑lane MIPI modes)
Recommendation: Use 4-lane mode for lower EMI and higher stability.
📦 5. What’s Included
- 1 × OSOYOO 10.1″ DSI Touch Screen
- 1 × 22pin-0.5mm to 22pin-0.5mm DSI Ribbon Cable (For Pi5)
- 1 × 22pin-0.5mm to 15pin-1mm DSI Ribbon Cable (For Pi4/3/2)
- 1 × Power Cable (2-pin)
- 2 × Stand (1Pair)
- 1 × Mounting Screws Set
- 1 × Driver & Installation Guide (Download Link)
🚀 6. Typical Applications
- Embedded Control Panels
- Industrial / HMI Projects
- DIY Raspberry Pi Tablets
- Smart Home Control Screens
- Educational & Maker Projects
❗ 7. Important Notes
- ⚠ Driver installation is required
- ❌ Not HDMI / Not USB monitor
- ✔ Designed for Raspberry Pi DSI interface only
- ✔ 4‑Lane MIPI DSI mode recommended for stability
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
