MCU & Expansion Board

Filters

OSOYOO OSOLINK WIFI/BLE I/O shield

Prezzo normale €14,95 EUR
Prezzo di vendita €14,95 EUR Prezzo normale
Prezzo unitario
The OSOLINK WiFi/BLE I/O Shield v1.0 is a wireless communication expansion board designed for Arduino Uno, Arduino...
OSOYOO ESP32-S3 GPIO Breakout Board w/ LED Indicators, 5V/3A & 3.3V/3A Output

OSOYOO ESP32-S3 GPIO Breakout Board w/ LED Indicators, 5V/3A & 3.3V/3A Output

Prezzo normale €22,95 EUR
Prezzo di vendita €22,95 EUR Prezzo normale
Prezzo unitario
Key Features Real-Time Visual DebuggingEach GPIO pin is equipped with a dedicated LED indicator driven...
Universal Debug Shield for arduino UNO Board with LED Pin Status Indicators
Esaurito

Universal Debug Shield for arduino UNO Board with LED Pin Status Indicators

Prezzo normale €11,95 EUR
Prezzo di vendita €11,95 EUR Prezzo normale
Prezzo unitario
● Visual Pin Status Monitoring at a Glance: Each GPIO port features a dedicated LED...
30P/38P ESP32 & ESP8266 Shiled Breakout Board Terminal Block Shield HAT with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED

30P/38P ESP32 & ESP8266 Shiled Breakout Board Terminal Block Shield HAT with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED

Prezzo normale €13,95 EUR
Prezzo di vendita €13,95 EUR Prezzo normale
Prezzo unitario
COMPATIBILITY NOTICE: Designed for most 30-pin or 38-pin ESP32-WROOM and ESP32-WROVER development boards, and 30-pin...
IO Breakout Board for Raspberry Pi Pico - GPIO Status LEDs, Reverse Power Protection, 3-Pin Sensor/Servo Interface, Independent 5V/3.3V Power Supply, On-Board Screw Terminals for Prototyping

IO Breakout Board for Raspberry Pi Pico - GPIO Status LEDs, Reverse Power Protection, 3-Pin Sensor/Servo Interface, Independent 5V/3.3V Power Supply, On-Board Screw Terminals for Prototyping

Prezzo normale €13,95 EUR
Prezzo di vendita €13,95 EUR Prezzo normale
Prezzo unitario
GPIO status LED: LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs...
Pro Micro IO Breakout Board - GPIO Status LEDs,3-Pin Sensor/Servo Ports,5V/2A

Pro Micro IO Breakout Board - GPIO Status LEDs,3-Pin Sensor/Servo Ports,5V/2A

Prezzo normale €12,95 EUR
Prezzo di vendita €12,95 EUR Prezzo normale
Prezzo unitario
GPIO status LED: LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs...
Nano Breakout Board,GPIO Status LED,I/O Shield,Terminal Expansion block for Arduino Nano, 5V 3.3V Outputs

Nano Breakout Board,GPIO Status LED,I/O Shield,Terminal Expansion block for Arduino Nano, 5V 3.3V Outputs

Prezzo normale €12,95 EUR
Prezzo di vendita €12,95 EUR Prezzo normale
Prezzo unitario
Compatible models ->Nano, OSOYOO Nano with USB-C,LGT Nano. GPIO status LED -> LED on if...
NodeMCU USB-C ESP8266 WiFi Development Board for Arduino

NodeMCU USB-C ESP8266 WiFi Development Board for Arduino

Prezzo normale €7,95 EUR
Prezzo di vendita €7,95 EUR Prezzo normale
Prezzo unitario
OSOYOO NodeMCU ESP8266 development board is based on ESP8266 micro controller (ESP-12F) with 802.11 b...
Nano V3.0 Board for Arduino ATmega328P CH340 5V/16M USB-C with Cable

Nano V3.0 Board for Arduino ATmega328P CH340 5V/16M USB-C with Cable

Prezzo normale €9,95 EUR
Prezzo di vendita €9,95 EUR Prezzo normale
Prezzo unitario
If you require a nano board without soldering, please communicate with customer service to make...
LGT Nano for Arduino Compatible with ATmega328p Chip USB-C Interface

LGT Nano for Arduino Compatible with ATmega328p Chip USB-C Interface

Prezzo normale €6,95 EUR
Prezzo di vendita €6,95 EUR Prezzo normale
Prezzo unitario
Compatible with Arduino Nano V3.0,for Arduino IDE High-performance low-power 8-bit processor The maximum main frequency...
Pro Micro Board for Arduino ATmega32U4 5V/16MHz USB-C Port

Pro Micro Board for Arduino ATmega32U4 5V/16MHz USB-C Port

Prezzo normale €11,95 EUR
Prezzo di vendita €11,95 EUR Prezzo normale
Prezzo unitario
ATmega32U4 running at 5V/16MHz The ATmega32U4 chip on the Pro Micro board comes preprogrammed with...
Stepper Motor HAT for Raspberry Pi 3B/3B+/2B/2B+/A+, Motor Controller Drives Two Stepper Motors, Use for Players DIY Robot, Intelligent car, Mechanical arm, Intelligent PTZ etc

Stepper Motor HAT for Raspberry Pi 3B/3B+/2B/2B+/A+, Motor Controller Drives Two Stepper Motors, Use for Players DIY Robot, Intelligent car, Mechanical arm, Intelligent PTZ etc

Prezzo normale €18,95 EUR
Prezzo di vendita €18,95 EUR Prezzo normale
Prezzo unitario
This expansion board is a full-featured robot expansion version, which can support multiple motors/stepper motors/Servo...
1 2 3 »
Ordina per
  • In primo piano
  • Più rilevanti
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente

Recently Viewed Products