OSOYOO 10.1″ MIPI DSI Touch Screen for Raspberry Pi 5/4/3/2 | IPS 800×1280 | Driver Required | Industrial Embedded Monito
OSOYOO 10.1″ MIPI DSI Touch Screen for Raspberry Pi 5/4/3/2 | IPS 800×1280 | Driver Required | Industrial Embedded Monito
-
🌟 1. Product Overview
The OSOYOO 10.1″ MIPI DSI Touch Screen is a high-quality display designed for Raspberry Pi computers (Pi 5 / 4 / 3 / 2). Featuring an 800×1280 IPS panel with capacitive touch, it provides clear visuals, wide viewing angles, and accurate touch response — ideal for embedded, industrial, and DIY projects.
⚠️ Important: This OSOYOO display uses the DSI interface only and requires driver installation before use. It is not HDMI or USB plug‑and‑play.
⚠️ Online Tutorial: https://osoyoo.com/2025/08/05/osoyoo-10-1-inch-dsi-display/🔌 2. Interface & Compatibility
✔ MIPI DSI Interface (2 & 4 lanes supported)
✔ Compatible with: Raspberry Pi 5 / 4 / 3 / 2
✔ Supports latest Raspberry Pi OS (Bookworm / Trixie kernel 6.12+)
✔ Designed for embedded Linux & Raspberry Pi OS desktop
💡 2‑Lane Mode (default) — Quick setup for general use
💡 4‑Lane Mode (recommended) — Uses lower signal clock, reduces EMI noise, and increases display stability in industrial applications
📊 3. Technical Specifications
Parameter
Value
Brand
OSOYOO
Screen Size
10.1″
Resolution
800×1280 IPS
Touch Type
Capacitive (G+G)
Interface
MIPI DSI (2 & 4 lanes)
Refresh Rate
Up to 60 Hz
Surface Hardness
6H toughened glass
Brightness
250 nits
Power
5 V via GPIO (Pi)
Viewing Angle
85°/85°/85°/85°
Operating Temp
0‑50 °C
Storage Temp
-10‑70 °C
🛠 4. Installation & Driver Instructions
OSOYOO 10.1″ DSI display requires driver installation:
- Connect DSI ribbon cable to the Pi’s DSI port
- Connect 5 V/GND to GPIO pins
- Secure Pi with included screws
- Install the provided driver (supports 2‑lane and 4‑lane MIPI modes)
Recommendation: Use 4-lane mode for lower EMI and higher stability.
📦 5. What’s Included
- 1 × OSOYOO 10.1″ DSI Touch Screen
- 1 × 22pin-0.5mm to 22pin-0.5mm DSI Ribbon Cable (For Pi5)
- 1 × 22pin-0.5mm to 15pin-1mm DSI Ribbon Cable (For Pi4/3/2)
- 1 × Power Cable (2-pin)
- 2 × Stand (1Pair)
- 1 × Mounting Screws Set
- 1 × Driver & Installation Guide (Download Link)
🚀 6. Typical Applications
- Embedded Control Panels
- Industrial / HMI Projects
- DIY Raspberry Pi Tablets
- Smart Home Control Screens
- Educational & Maker Projects
❗ 7. Important Notes
- ⚠ Driver installation is required
- ❌ Not HDMI / Not USB monitor
- ✔ Designed for Raspberry Pi DSI interface only
- ✔ 4‑Lane MIPI DSI mode recommended for stability
| PartNumber | Display | Touch | Audio | Device Support | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resolu-tion | Display Port | Display Panel | View Angle | Touch Type | Touch Port | Toughened Glass Panel | Optical Bonding | Speaker | Signal Output | Pi | JETSON NANO | PC | |
| SPI DISPLAYS | |||||||||||||
| PROS: low price. | |||||||||||||
| CONS: low refresh rate & resolution, supports Raspberry Pi only, requires Raspberry Pi 40PIN GPIO (the SPI bus), poor compatibility with Raspberry Pi system. | |||||||||||||
| 3.5inch RPi SPI LCD | 480×320 | SPI | TFT | – | Resistive | SPI | √ | × | × | × | √ | × | × |
| HDMI / TYPE-C DISPLAYS | |||||||||||||
| PROS: high refresh rate, multiple resolution support, multiple devices support, better compatibility with Raspberry Pi system. | |||||||||||||
| CONS: somewhat costly. | |||||||||||||
| 3.5inch Resistive HDMI LCD | 480*320 | HDMI | TFT | – | Resistive | SPI | √ | × | × | × | √ | × | × |
| 3.5inch Resistive HDMI LCD with case | 480*320 | HDMI | TFT | – | Resistive | SPI | √ | × | × | × | √ | × | × |
| 3.5inch HDMI Capacitive LCD | 480*320 | HDMI | IPS | 120° | Capacitive | Type-C | √ | × | × | × | √ | √ | √ |
| DSI DISPLAYS | |||||||||||||
| PROS: moderate price, high refresh rate, leaves the Raspberry Pi 40PIN GPIO free, better compatibility with Raspberry Pi system. | |||||||||||||
| CONS: supports Raspberry Pi only. | |||||||||||||
| 3.5 inch DSI LCD | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 4.3inch DSI LCD | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 5inch DSI TN LCD | 800×480 | DSI | TFT | – | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 5inch DSI IPS LCD | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 5inch DSI IPS LCD with Case | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 7inch DSI TN LCD | 800×480 | DSI | TFT | – | Capacitive | I2C | × | × | × | × | √ | × | × |
| 7inch DSI IPS LCD | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 7inch DSI IPS LCD with Pistudio Case | 800×480 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 7inch DSI IPS LCD (H) with stand holder | 720×1280 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
| 10.1inch DSI IPS LCD (H) with stand holder | 800×1280 | DSI | IPS | 170° | Capacitive | I2C | √ | × | × | × | √ | × | × |
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
Frequently Asked Questions
Which Raspberry Pi models are compatible? +
Compatible with Raspberry Pi 3B, 3B+, 4B, and Zero 2W unless otherwise specified on the product page. Check the product description for exact compatibility details.
Is the Raspberry Pi board included? +
The Raspberry Pi board itself is not included (sold separately). The kit includes all components needed to use with your existing Raspberry Pi board.
Where are the tutorials and setup guides? +
Full tutorials are free at osoyoo.com. Each product has dedicated step-by-step lessons covering installation, wiring, and example projects.
How do I get technical support? +
Email support@osoyoo.com. Our team replies within 24 hours on business days and can help with setup, wiring, driver installation, and code issues.
